Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review.

INTRODUCTION: Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population. METHODOLOGY: An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies. RESULTS: The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 µm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 µm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology. CONCLUSION: This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

Detection, characterisation and management of complex root canal configurations in the mesiobuccal roots of maxillary first molars: A case series.

This report presents the detection, characterisation, instrumentation and filling of complex canal configurations in the mesiobuccal (MB) root of maxillary first molars. Three patients were referred for root canal treatment in first maxillary molars. Medical history, age, sex and clinical findings were recorded. Intraoral periapical radiographs and cone beam computed tomography (CBCT) were used for diagnosis and pre-operative assessment. Using Ahmed et al. (2017) classification system, codes 3MaxM MB3-5-4-2 DB1-2-1 P1 (case 1), 3MaxM MB2-5-3-2 DB1 P1 (case 2) and 3MaxM MB1-4-2-1-2 DB1 P1 (case 3) were identified. Using the dental operating microscope, CBCT (if indicated) and troughing up to 3 mm allowed identification of more than three canals in the MB root of maxillary first molars. The coding system proposed by Ahmed et al. (2017) allows the classification of MB roots with highly complex canal configurations.

The Study and Relevance of Pulp Chamber Anatomy in Endodontics - A Comprehensive Review.

With the ever-increasing understanding of tooth anatomy, there is a renewed focus on the pulp chamber as an important component of the root canal system. For example, the pulp chamber is of critical relevance during diagnostic procedures such as pulp sensibility tests, deep caries removal, vital pulp treatments, access cavity preparation, tooth whitening, tooth restoration as well as methods for examining the floor of the pulp chamber to aid the detection of root canal orifices or the presence of perforations and cracks. The more recent concept of minimal invasive endodontics has also created a need to understand better the anatomy of the pulp chamber. The purpose of this article is to discuss the research methods used to study pulp chamber anatomy and the significance of the pulp chamber in endodontic research and clinical practice. In addition, directions for future research are emphasised.

Characterization of the root and canal anatomy of maxillary premolar teeth in an Iraqi subpopulation: a cone beam computed tomography study.

This study aims to evaluate the number of roots and root canal morphology types of maxillary premolars in relation to a patient's gender and age in an Iraqi population using two classification systems. Cone beam computed tomography (CBCT) scans of 1116 maxillary premolars from 385 patients were evaluated for the number of roots and root canal morphology types according to Vertucci's classification and Ahmed et al. classification systems. Differences in the number of roots and root canal morphology types with regard to tooth type, patients' gender and age groups were evaluated and the degree of bilateral symmetry was determined. Chi-squared test was used for statistical analysis. About 51.1% of the 1st premolars were double rooted. The majority (87.9%) of the 2nd premolars were single rooted. The three-rooted form presented in only 1.2% and 0.7% of the 1st and 2nd premolars, respectively. Vertucci Type IV (Ahmed et al. code 2MaxP B1P1) and Vertucci Type I (Ahmed et al. code 1MaxP1) were the most common canal morphology types in the 1st and 2nd premolars, respectively. Females showed a lower number of roots and a higher prevalence of Vertucci Type I configuration (P < 0.05). Younger age groups showed a higher prevalence of Vertucci Type I configuration (P < 0.05). Bilateral symmetry was seen in more than half of the maxillary premolars. There is a considerable variation in the number of roots and root canal configurations of maxillary premolars in the studied Iraqi population, with a significant difference by gender and age groups. Ahmed et al. classification provided more accurate presentation of the root and canal anatomy in maxillary premolars compared to Vertucci's classification.

Implications of root, pulp chamber, and canal anatomy on pulpotomy and revitalization procedures.

OBJECTIVES: This review aims to discuss the implications of anatomy of the root, pulp chamber, and canals on pulpotomy and revitalization procedures (RPs) as treatment alternatives to root canal treatment procedures. METHODS: This narrative review was undertaken to address two main questions - why remove vital pulp tissue in teeth with complex canal anatomy when it can be preserved? And why replace the necrotic pulp in teeth with mature roots with a synthetic material when we can revitalize? This review also aims to discuss anatomical challenges with pulpotomy and revitalization procedures. RESULTS: Maintaining the vitality of the pulp via partial or full pulpotomy procedures avoids the multiple potential challenges faced by clinicians during root canal treatment. However, carrying out pulpotomy procedures requires a meticulous understanding of the pulp chamber anatomy, which varies from tooth to tooth. Literature shows an increased interest in the application of RPs in teeth with mature roots; however, to date, the relation between the complexity of the root canal system and outcomes of RPs in necrotic multi-rooted teeth with mature roots is unclear and requires further robust comparative research and long-term follow-up. CONCLUSIONS: Whenever indicated, pulpotomy procedures are viable treatment options for vital teeth with mature roots; however, comparative, adequately powered studies with long-term follow-up are needed as a priority in this area. RPs show promising outcomes for necrotic teeth with mature roots that warrant more evidence in different tooth types with long-term follow-ups.  CLINICAL RELEVANCE: Clinicians should be aware of the pulp chamber anatomy, which is subject to morphological changes by age or as a defensive mechanism against microbial irritation, before practicing partial and full pulpotomy procedures. RP is a promising treatment option for teeth with immature roots, but more evidence is needed for its applications in teeth with mature roots. A universal consensus and considerably more robust evidence are needed for the standardization of RPs in teeth with mature roots.

Critical analysis of a new system to classify root and canal morphology - A systematic review.

A novel system to classify root and canal morphology was recently introduced (Ahmed et al. 2017). This systematic review aimed to answer the following research question: Does the Ahmed et al. system provide a more accurate and practical classification of root and canal anatomy compared to other classifications? A literature search was conducted in Google Scholar, Scopus and Wiley Online Library to identify the citation counts for the article entitled 'A new system for classifying root and root canal morphology; doi.org/10.1111/iej.12685'. After removal of duplicates and unrelated articles, 15 studies were included and analysed. All studies compared the Ahmed et al. system with the Vertucci classification. Results revealed that both systems were able to classify simple canal configurations in single-rooted anterior and premolar teeth, disto-buccal and palatal roots of maxillary molars. However, the Ahmed et al. system provided more accurate and comprehensive categorisations of single-rooted teeth with complex canal anatomy, multi-rooted maxillary and mandibular premolars and the mesio-buccal root of maxillary molars. Further evidence on the utility of the Ahmed et al. system is required using other diagnostic devices especially in molars.

Application of two systems to classify the root and canal morphology in the human dentition: A national survey in India.

PURPOSE: To assess the application and accuracy of two systems (Vertucci et al. 1974 and Ahmed et al. 2017) in classifying the root and canal morphology of human dentition among final-year undergraduates, interns, and postgraduate dental students in India. METHODS: The survey was conducted using physical and online presentation modes in two phases. Phase 1; PowerPoint presentation (PPT), describing the most used classification system (Vertucci et al. 1974) and its supplementary types and Ahmed et al. (2017) classification. A single presenter delivered the PPT to participants, using either a projector in an auditorium/seminar hall (face-to-face) or an online platform (zoom meeting software). Phase 2 involved determining the students' responses. A questionnaire was distributed amongst the participants after the lecture and collected for analysis. Fisher's exact test was used to analyze the data statistically, and the significance level was set at 0.05 (p < 0.05). RESULTS: A total of 1082 participants were involved in this survey. Overall, 93% of study participants found that Ahmed et al. classification system was more practical and accurate than Vertucci et al. system and its supplemental configurations (p < 0.001). About 97% agreed that Ahmed et al. classification system aided in understanding root and canal morphology better than Vertucci's and its additional configurations, and they recommended to include in their curriculum (p < 0.001). CONCLUSIONS: In comparison to Vertucci's classification system and supplementary types, the undergraduate and postgraduate dental students, and interns in India agreed that Ahmed et al. classification system is more practical and accurate for classifying the root and canal morphology.

The Effect of a Setting Accelerator on the Physical and Mechanical Properties of a Fast-set White Portland Cement Mixed with Nano-zirconium Oxide.

OBJECTIVE: This study compared the effects of calcium chloride dihydrate (CaCl2.2H2O) on the physical properties and push-out bond strength of white Mineral Trioxide Aggregate (WMTA) and an experimental Malaysian Portland cement mixed with nano-zirconium oxide (nano-ZrO) [(radiopaque Malaysian Portland cement (RMPC). Mineral Trioxide Aggregate (MTA) was the first calcium silicate cement (CSC) introduced in dentistry, but up to date, it is an expensive cement with long setting time and causes tooth discolouration. Although Portland cement has been introduced as a potential substitute to MTA, it still faces some challenges such as long setting time and lack of sufficient radiopacity. METHODS: Four groups [WMTA, RMPC, fast-set WMTA (FS-WMTA) and fast-set RMPC (FS-RMPC)] were prepared. Initial setting time was evaluated using Vicat apparatus. The pH was measured at seven-day intervals. For discolouration potential, cements were packed in the pulp chamber of 46 extracted maxillary incisors. Spectrophotometric readings were obtained at seven-day intervals, and the rate of colour change (ΔE) was recorded. For the push-out bond strength testing, cements were applied in 48 sectioned root samples, and the test was performed using universal testing machine at crosshead speed of 0.5 mm/min until bond failure. Statistical analysis was done according to the nature of each group of data using SPSS 26. RESULTS: Addition of CaCl2.2H2O decreased the initial setting times of both RMPC and WMTA significantly (p<0.05). The pH values of FS-WMTA and FS-RMPC were comparable to their non-accelerated counterparts ranging from 10 to 12. Discolouration effect was more obviously observed with WMTA and FS-WMTA with time compared to RMPC formulations. Push-out bond strength of the two materials also showed an increase with the addition of the accelerator, however, only FS-WMTA showed statistically significant difference compared to WMTA (p<0.05). CONCLUSION: The addition of CaCl2.2H2O improves the physical and mechanical properties of the newly formulated RMPC and WMTA. The RMPC formulation overcomes the discolouration potential of WMTA. (EEJ-2022-12-155).

Physicochemical, mechanical and biological properties of nano-calcium silicate-based cements: a systematic review.

This systematic review evaluated the effects of nano-sized cement particles on the properties of calcium silicate-based cements (CSCs). Using defined keywords, a literature search was conducted to identify studies that investigated properties of nano-calcium silicate-based cements (NCSCs). A total of 17 studies fulfilled the inclusion criteria. Results indicated that NCSC formulations have favourable physical (setting time, pH and solubility), mechanical (push out bond strength, compressive strength and indentation hardness) and biological (bone regeneration and foreign body reaction) properties compared with commonly used CSCs. However, the characterization and verification for the nano-particle size of NCSCs were deficient in some studies. Furthermore, the nanosizing was not limited to the cement particles and a number of additives were present. In conclusion, the evidence available for the properties of CSC particles in the nano-range is deficient-such properties could be a result of additives which may have enhanced the properties of the material.

Direct pulp capping procedures - Evidence and practice.

The aim of direct pulp capping (DPC) is to promote pulp healing and mineralized tissue barrier formation by placing a dental biomaterial directly over the exposed pulp. Successful application of this approach avoids the need for further and more extensive treatment. In order to ensure a complete pulp healing with the placement of restorative materials, a mineralized tissue barrier must form to protect the pulp from microbial invasion. The formation of mineralized tissue barrier can only be induced when there is a significant reduction in pulp inflammation and infection. Consequently, promoting the healing of pulp inflammation may provide a favorable therapeutic opportunity to maintain the sustainability of DPC treatment. Mineralized tissue formation was observed as the favorable reaction of exposed pulp tissue against a variety of dental biomaterials utilized for DPC. This observation reveals an intrinsic capacity of pulp tissue for healing. Therefore, this review focuses on the DPC and its healing procedure as well as the materials used for DPC treatment and their mechanisms of action to promote pulpal healing. In addition, the factors that can affect the healing process of DPC, clinical considerations and future perspective has been described.

Antibiotic prescription in the management of endodontic infections amongst Iraqi final-year undergraduate dental students

Aim This study aimed to examine the prescription of antibiotics for endodontic infections among undergraduate dental students. Methods Two government Iraqi dental schools [(the University of Baghdad (UOB) (n=99) and University of Babylon (UB) (n=70)], and one private dental school [Osouldeen University College (OUC) (n=103)] were included in this survey study. A paper-based questionnaire composed of seven questions was distributed to students, and collected. A chi-square test was used for data analysis, and the level of significance was set at 0.05 (P=0.05). Results A statistically significant difference (P<0.05) was identified between students' answers in the three dental schools regarding antibiotic selection for endodontic infections in which patients had no known allergies (P=0.001). In comparison to other dental schools, a statistically significantly higher proportion of respondents from UOB (32%) favored Azithromycin 500mg for treating patients with penicillin hypersensitivity (P=0.003). A high percentage of participants (62.1%) selected antibiotic prescription in cases with necrotic pulp and symptomatic apical periodontitis (with swelling and moderate/severe preoperative symptoms). However, there were no significant differences between the 3 dental schools (P>0.05). Conclusion In conclusion, a significantly greater percentage of UB chose amoxicillin for the treatment of endodontic infection in patients with no medical allergies. Azithromycin 500mg was selected by UOB as the preferred option in patients who were sensitive to penicillin. Our findings support the need for the implementation of strategies to raise awareness of good antibiotic prescribing practices among dentists in Iraq.

A critical analysis of laboratory and clinical research methods to study root and canal anatomy.

The technical execution of root canal treatment procedures demands a thorough understanding and knowledge of root and canal anatomy. Over the decades, and with the aid of various research methods such as staining and clearing, 2D radiographic imaging, sectioning procedures, cone beam computed tomography and micro-computed tomography, many laboratory and clinical studies have been undertaken to understand the root and canal anatomy of the human dentition. This has resulted in a tremendous increase in the body of knowledge with a wide range of qualitative and quantitative presentations of the root and canal anatomy. This review aims to provide a critical analysis for the laboratory and clinical research methods in root and canal anatomy studies. In addition, it aims to identify existing gaps and present insights for directions of future research and ways for translation to clinical endodontics.

Current strategies for conservative endodontic access cavity preparation techniques-systematic review, meta-analysis, and decision-making protocol.

OBJECTIVES: To assess related studies and discuss the clinical implications of endodontic access cavity (AC) designs. MATERIALS AND METHODS: A systematic review of studies comparing the fracture resistance and/or endodontic outcomes between different AC designs was conducted in two electronic search databases (PubMed and Web of Science) following the PRISMA guidelines. Study selection, data extraction, and quality assessment were performed. Meta-analyses were undertaken for fracture resistance and root canal detection, with the level of significance set at 0.05 (P = 0.05). RESULTS: A total of 33 articles were included in this systematic review. The global evaluation of the risk of bias in the included studies was assessed as moderate, and the level of evidence was rated as low. Four types of AC designs were categorized: traditional (TradAC), conservative (ConsAC), ultraconservative (UltraAC), and truss (TrussAC). Their impact on fracture resistance, cleaning/disinfection, procedural errors, root canal detection, treatment time, apical debris extrusion, and root canal filling was discussed. Meta-analysis showed that compared to TradAC, (i) there is a significant higher fracture resistance of teeth with ConsAC, TrussAC, or ConsAC/TrussAC when all marginal ridges are preserved (P < 0.05), (ii) there is no significant effect of the type of AC on the fracture resistance of teeth when one or two marginal ridges are lost (P > 0.05), and (iii) there is a significantly higher risk of undetected canals with ConsAC if not assisted by dental operating microscope and ultrasonic troughing (P < 0.05). CONCLUSIONS: Decreasing the AC extent does not necessarily present mechanical and biological advantages especially when one or more surfaces of the tooth structure are lost. To date, the evidence available does not support the application of TrussAC. UltraAC might be applied in limited occasions. CLINICAL RELEVANCE: Maintaining the extent of AC design as small as practical without jeopardizing the root canal treatment quality remains a pragmatic recommendation. Different criteria can guide the practitioner for the optimal extent of AC outline form which varies from case to case.

Application of a new System for Classifying Root and Canal Anatomy in Clinical Practice - Explanation and Elaboration.

Adequate understanding and accurate characterization of normal and unusual root and canal morphology are essential requirements for successful root canal treatment. A new coding system for classifying root and canal morphology, accessory canals and anomalies has been introduced. In addition to technological advances related to experimental studies involving micro-computed tomography, the continuing clinical advances in magnification, illumination, imaging and intra-operative root canal treatment procedures have allowed clinicians to identify an increasingly wide range of anatomical variations in roots and canals in an attempt to achieve more predictable clinical outcomes. This review aims to provide a step-by-step explanation for the clinical application of the new coding system in dental practice, and to describe the anatomical variations in roots and canals for teeth scheduled for root canal treatment.

Histological evaluation of a novel phosphorylated pullulan-based pulp capping material: An in vivo study on rat molars.

AIM: To evaluate the dental pulp response to a novel mineral trioxide aggregate containing phosphorylated pullulan (MTAPPL) in rats after direct pulp capping. METHODS: Ninety-six cavities were prepared in the maxillary first molars of 56 male Wistar rats. The dental pulps were intentionally exposed and randomly divided into four groups according to the application of pulp capping materials: MTAPPL; phosphorylated pullulan (PPL); a conventional MTA (Nex-Cem MTA, NCMTA; positive control); and Super-Bond (SB; negative control). All cavities were restored with SB and observed for pulpal responses at 1-, 3-, 7- and 28-day intervals using a histological scoring system. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney U-test with Bonferroni's correction, and the level of significance was set at 0.05. DMP1 and CD34 antigen were used to evaluate odontoblast differentiation and pulpal vascularization, respectively. RESULTS: On day 1, mild inflammatory cells were present in MTAPPL and NCMTA groups; fewer inflammatory cells were present in the PPL, whereas SB was associated with a mild-to-moderate inflammatory response. A significant difference was observed between PPL and SB (p < .05). No mineralized tissue deposition was observed. On day 3, moderate-to-severe inflammatory cells were present in PPL and SB, whereas MTAPPL and NCMTA had a mild inflammatory response. Initial mineralized tissue deposition was observed in the NCMTA, MTAPPL and SB. A significant difference was observed between MTAPPL and PPL (p < .05). On day 7, a thin layer of mineralized tissue was observed in all tested groups with no or mild inflammatory response. On day 28, no inflammatory response was observed in MTAPPL, whereas NCMTA, PPL and SB had mild inflammatory responses. A significant difference was observed between MTAPPL and SB (p < .05). Complete mineralized tissue barrier formation was observed in MTAPPL, NCMTA and PPL with no significant difference (p > .05). SB exhibited incomplete mineralized tissue barriers, significantly different from NCMTA, MTAPPL and PPL (p < .05). The staining with CD34 was positive in all the groups on all observation days. CONCLUSION: The favourable pulpal responses and induction of mineralized tissue formation associated with MTAPPL indicate its potential application as a direct pulp capping material.

Root and canal morphology of the anterior permanent dentition in Malaysian population using two classification systems: A CBCT clinical study.

This cone beam computed tomography (CBCT) study aimed to evaluate the root canal morphology of permanent anteriors in Malaysian population using two classification systems (Vertucci 1984 and Ahmed et al 2017). CBCT images of 856 patients with 10,080 anterior teeth were analysed. Results showed that, except for six mandibular canines, all anterior teeth were single-rooted. According to Ahmed et al's system and Vertucci's classification, code 1 MaxA1 and type I were the most common types except in mandibular laterals where 1 ManA1-2-1 and type III were the most common, respectively. The prevalence of canal variations in mandibular incisors was higher in males and the 20-30 age group than in females and other age groups (P < 0.001). The Malay ethnic group showed more canal variations in mandibular incisors than Chinese and Indians (P < 0.001). Mandibular anteriors showed a wide range of canal variations, and the canal complexity is significantly affected by sex, ethnicity and age. The new classification provides an accurate presentation for root canal morphology.